PROBLEM | SOLUTION |
|
|
Shuts off before load is dry | • Dryer load is too small. Add more items or a few towels and restart |
| the cycle. |
| • Dryer load is too large. Remove some items and restart the dryer. |
|
|
Lint on clothes | • Make sure the lint filter is cleaned before every load. With some loads |
| that produce high amounts of lint, it may be necessary to clean the |
| filter during the cycle. |
| • Some fabrics are lint producers (for example, a fuzzy white cotton |
| towel)and they should be dried separately from clothes that are lint |
| trappers(for example, a pair of lack linen pants) |
| • Divide larger loads into smaller loads for drying |
| • Check pockets thoroughly before washing and drying clothes. |
|
|
Garments still wrinkled after | • Small loads of 1 to 4 items work best. |
• Load fewer garments.Load | |
|
|
Odors remain in clothing | • Fabrics containing strong odors should be washed in a normal cycle. |
after Refresh. |
|
|
|
Water drips from nozzle | • This is steam condensation. The dripping water will stop after a short |
when | time. |
|
|
Sprayed water is not visible | • Sprayed water is difficult to see when the door is closed |
during |
|
|
|
05 troubleshooting
troubleshooting _33
5:38:27
