Undo - Restores the monitor value for the active control pane to its previous setting. If no change was made to the current control pane, undo will have no affect.
Reset - Restores the monitor value for the active control pane to its factory setting.
Slider - Increases or decreases the monitor value for the current control pane.
Previous - Returns to the previous control pane in the tuning sequence. All changes to the current pane are applied.
Next- Forwards to the next control pane in the tuning sequence. All changes to the current pane are applied.
Cancel - Cancels the Wizard mode. All changes to the current session are not applied.
Pattern - Dimmed in Wizard mode. All patterns are automatically loaded and the Magic Tune Control Panel is position in the bottom center of the screen.
Wizard Mode Adjustment Sequence
Resolution- Lists all supported resolutions of the display. Select the Preferred button to set the display to the manufacturer's recommended settings. Selecting any resolution over than Preferred will reduce the clarity of the display.
Image Setup - Loads the Clock and Phase instruction pane, pattern, and slider controls. Select the AUTO button, then use the Clock and Phase slider to completely eliminate residual noise.
Brightness - Loads the Brightness instruction pane, pattern, and slider control. Use the slider to tune the brightness in the darker image area.
Contrast - Loads the Contrast instruction pane, pattern, and slider control. Use the slider to tune the contrast.
Position - Loads the Position instruction pane, pattern and control buttons. Use the control buttons to position the grid so that all edges are visible.
White Point - Lists the supported white point presets, pattern, and slider control. Select the Normal button to set the display to the manufacturer's recommended white point or use the slider to fine tune the white point. Note: Some displays do not allow for gradual white point adjustment.
Color Calibration - Goes through a
