troubleshooting
PROBLEM | POSSIBLE CAUSE | SOLUTION | |
|
|
| |
Has spots and film left | The water temperature is low. | For best performance, the | |
on dishes. |
| temperature of the supplied water | |
|
| should be 120 ˚F (49 ˚C). | |
|
|
| |
| The detergent amount is | Supply the appropriate amount of | |
| inappropriate. | automatic dishwasher detergent. | |
|
|
| |
| Too many dishes have been loaded. | Load only an appropriate number of | |
|
| dishes. | |
|
|
| |
| Dishes are loaded incorrectly. | Load your dishes as recommended. | |
|
| (See page 16.) | |
|
|
| |
| The pressure of the supplied water is | The proper pressure of the supplied | |
| insufficient. | water is 20~120 psi (140~830 kPa). | |
|
|
| |
| Improper detergent is being used. | Use a automatic dishwasher | |
|
| detergent. | |
|
|
| |
| There is no rinse aid. | Check the dispenser and add the | |
|
| rinse aid. | |
|
|
| |
| The water is too hard. | Add a water softener. | |
|
|
| |
Is too noisy. | Sound is generated when the | This is normal operation. | |
| dispenser cover is open. |
| |
| Sound is generated when the drain |
| |
| pump is operating in an early stage. |
| |
|
|
| |
| The dishwasher is not level. | Ensure the dishwasher is level. | |
|
|
| |
| There is a ‘chopping’ sound because | Rearrange the dishes. | |
| a nozzle is bumping against the |
| |
| dishes. |
| |
|
|
| |
Leaves glasses with a | The supplied water is soft and too | Underload the dishwasher and use a | |
dim polish. | much detergent is being supplied. | rinse aid to minimize this. | |
|
|
| |
Leaves black or gray | Aluminum dishes have been loaded. | Remove the marks on the dishes | |
marks on the dishes. |
| using a low sensitivity cleaner. | |
|
|
| |
Leaves a yellow or brown | This occurs from coffee and tea | Remove the soils using a spot | |
film on the inside of the | soils. | cleaner. | |
dishwasher. |
|
| |
|
|
| |
Does not have any lamps | The power is not connected. | Connect the power cable. | |
lit up. |
|
| |
The fuse is broken or the circuit | Replace the fuse or repair the circuit | ||
| |||
| breaker is out of order. | breaker. | |
|
|
| |
Does not have a | The nozzle hole is clogged with food | Clean the nozzle hole. | |
smoothly rotating nozzle. | particles. |
| |
|
|
| |
Has a bent upper rack | The dishes are not loaded properly. | Load your dishes as recommended. | |
after loading dishes. |
| (See page 16.) | |
|
|
|
24_ troubleshooting
