DUCTING REQUIREMENTS

•Use a 4-inch (10.2 cm) diameter rigid aluminum or rigid galvanized steel duct.

•Do not use a smaller duct.

•Ducts larger than 4 inches (10.2 cm) in diameter can result in increased lint accumulation. Lint accumulation should be cleaned regularly.

•If a fl exible metal duct must be used, use the type with a stiff sheet metal wall. Do not use a fl exible duct with a thin foil wall. Serious blockage can result if the fl exible metal duct is bent too sharply.

•Never install any type of fl exible duct in walls, ceilings, or other concealed spaces.

•Only a rigid or fl exible metal duct should be used for exhausting.

•Keep the exhaust duct as straight and short as possible.

•Secure joints with duct tape. Do not use screws.

•DO NOT EXHAUST DRYER INTO ANY WALL, CEILING, CRAWL SPACE, OR CONCEALED SPACE OF A BUILDING, GAS VENT, OR ANY OTHER COMMON DUCT OR CHIMNEY.

THIS COULD CREATE A FIRE HAZARD FROM LINT EXPELLED BY THE DRYER.

•A plastic fl exible duct can kink, sag, be punctured, reduce airfl ow, extend drying times, and affect dryer operation.

•Exhaust systems longer than recommended can extend drying times, affect machine operation, and may collect lint.

•The exhaust duct should end with an exhaust hood with a swing-out damper to prevent back drafts and entry of wildlife. Never use an exhaust hood with a magnetic damper.

•The hood should have at least 12 inches (30.5 cm) of clearance between the bottom of the hood and the ground or other obstruction. The hood opening should point down.

•Never install a screen over the exhaust outlet.

•To avoid lint buildup, do not exhaust the dryer directly into a window well. Do not exhaust under a house or porch.

•If exhaust ductwork must run through an unheated area, the duct should be insulated and slope slightly down towards the exhaust hood to reduce condensation and lint buildup.

•Inspect and clean the interior of the exhaust system at least once a year. Unplug the power cord before cleaning.

•Check frequently to be sure the exhaust hood damper opens and closes freely.

•Check once per month, and clean at least one time per year. Note: If clothes are not getting dry, then check ducting for obstructions.

ELECTRIC AND GAS DRYER

Weather Hood Type

Recommended

Use only for short-run installation

 

4” (10 .16 cm)

2.5” (6.35 cm)

No. of 90° elbows

Rigid

Metallic Flexible*

Rigid

Metallic Flexible*

 

 

 

 

 

0

24.4 m (80 ft.)

12.4 m (41 ft.)

22.6 m (74 ft.)

10.1 m (33 ft.)

 

 

 

 

 

1

20.7 m (68 ft.)

11.2 m (37 ft.)

18.9 m (62 ft.)

8.8 m (29 ft.)

 

 

 

 

 

2

17.4 m (57 ft.)

10.1 m (33 ft.)

15.5 m (51 ft.)

7.6 m (25 ft.)

 

 

 

 

 

3

14.3m (47 ft.)

9.0 m (29 ft.)

12.5 m (41 ft.)

6.5 m (21 ft.)

 

 

 

 

 

*Do not use non-metallic fl exible duct.

installing your dryer _9

01 installing your dryer

DV331AE-03026A-01_EN.indd Sec5:9

2011-03-28 ￿￿ 12:17:58

Page 8 Page 10
Page 9
Image 9
Samsung DV331AE, DV331AG user manual Ducting Requirements, Electric and GAS Dryer, Weather Hood Type Recommended
Page 8 Page 10

DV331AG, DV331AE specifications

The Samsung DV331AE and DV331AG are two highly efficient and versatile dryer models designed to meet the diverse laundry needs of modern households. Both models stand out for their impressive features, user-friendly design, and innovative technologies that streamline the drying process.

One of the primary features of the Samsung DV331AE and DV331AG is their advanced drying technology. These models are equipped with Samsung's Eco Dry feature, which significantly reduces energy consumption without compromising drying performance. The Eco Dry system intelligently optimizes the drying cycle, making these dryers not only environmentally friendly but also cost-effective for long-term use.

Another significant aspect is the large capacity of both models. With a generous drum size, the DV331AE and DV331AG can accommodate large loads, making them perfect for families or anyone who frequently does laundry. The spacious drum allows for efficient airflow and even distribution of heat, ensuring that clothes dry thoroughly and quickly.

Samsung's innovation also shines through with the inclusion of Sensor Dry technology. This feature monitors moisture levels within the drum and adjusts drying time accordingly, preventing over-drying and ensuring that clothes come out precisely as needed. This not only helps to maintain the integrity of fabrics but also contributes to energy efficiency.

In terms of convenience, both models offer a range of drying cycles and options to suit various fabric types and drying preferences. From delicate items to heavy-duty blankets, users can easily select the appropriate cycle for optimal results. Additionally, the wrinkle release option minimizes the need for ironing by reducing wrinkles during the drying process.

User experience is further enhanced with features like a digital display, intuitive controls, and a lint filter indicator that alerts users when the filter needs cleaning. These thoughtful design elements make operating the dryer straightforward and enhance overall efficiency.

Furthermore, both the DV331AE and DV331AG models prioritize durability and reliability. Their robust construction and high-quality components ensure that they can withstand the demands of regular use while delivering consistent performance over time.

In summary, the Samsung DV331AE and DV331AG dryers combine efficiency, user-friendly features, and innovative technologies, making them excellent choices for anyone looking to upgrade their laundry experience. With their vast capacities, energy-saving options, and smart drying technologies, these models are well-equipped to handle the laundry needs of today’s busy lifestyles.
Top Page Image Contents