Connections

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV and other components.

Before Connecting the DVD Player

-Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

-Refer to the user’s manual of the additional components you are connecting for more informa- tion on those particular components.

A. Connecting to a TV (SCART)

-Using Scart cable, connect to SCART terminal on the rear of the DVD player to the SCART IN terminals of TV.

-Turn on the DVD player and TV.

-Press the input selector on your TV remote control until the Video signal from the DVD player appears on the TV screen.

B.Connecting to a TV (VIDEO CVBS)

-Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of TV.

-Turn on the DVD player and TV.

-Press the input selector on your TV remote control until the Video signal from the DVD player appears on the TV screen.

Note

-Noise may be generated if the audio cable is too close to the power cable.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page.

-The number and position of terminals can vary depending on your TV set. Please refer to the user's manual of the TV.

-If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD player.

-If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video Output mode changes in the following sequence: (SCART-CVBS ➝ I-SCAN ➝ P-SCAN ➝ SCART-RGB).

C. Connection to an Audio System (2 Channel Amplifier, Dolby Digital, or MPEG2)

-Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier.

-If Using the video signal cable(s), connect the VIDEO terminals on the rear of the DVD player to the VIDEO terminal of your TV, If using a coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) termi- nal of the Amplifier.

-Turn on the DVD player, TV, and Amplifier.

-Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

D. Connections to a TV Interlace / Progressive

-Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV.

-Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.

-Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

-Set the Video Output to I-SCAN/P-SCANin the Display Setup menu. You can use the VIDEO SEL. button to change the Video Output mode.

Note

-What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace output method has. Progressive scanning method can provide better and clearer picture quality.

-There is no component video displayed when "SCART-RGB" Selected by pressing VIDEO SELECT button on remote control.

 

 

 

 

 

2-Channel stereo ampilfier,

RED

WHITE

 

 

 

 

C

Dolby digital

 

 

COAXIAL CABLE

 

 

 

 

WHITE

 

 

 

 

 

WHITE

 

 

 

BLUE

GREEN

 

 

 

 

RED

 

 

 

 

 

RED

 

 

YELLOW

RED

 

 

 

 

AUDIO CABLE

VIDEO CABLE B

 

 

 

 

A SCART CABLE

 

 

D COMPONENT CABLE

 

 

 

 

 

YELLOW

 

 

 

 

Do not use the connection

RED

WHITE

RED

BLUE GREEN

 

 

 

Scart and Component Video

 

 

 

 

 

 

 

(Y.Pb,Pr) Simultaneously

4