Description-Rear Panel
DVD-P239
1 | 2 | 3 | 4 | 5 | 6 |
Rear Panel
1.DIGITAL AUDIO OUT JACKS
•Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2.ANALOG AUDIO OUT JACKS
•Connect to the Audio input jacks of your television, audio/video receiver.
3.VIDEO OUT JACK
•Use a video cable to connect to the Video input jack on your television.
•The VIDEO OUT SELECT switch must be set to the 525i(480i) or
4.
•Use the
•The VIDEO OUT SELECT switch must be set to the
5.COMPONENT VIDEO OUT JACKS
•Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video. Along with
•If 525P(480P) VIDEO is selected, progressive scan mode will work.
•If 525i(480i) VIDEO is selected, interlaced scan mode will work.
6.VIDEO OUT SELECT SWITCH
•Use this switch to set video out.
•If 525P(480P) VIDEO is selected, VIDEO and
Important Note
•Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan settings in the TV’s menu system.
•If 525P(480P) VIDEO OUT is selected, VIDEO and
•Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
DVD-E139
SETUP
1 | 2 | 3 | 4 | 5 | 6 |
Rear Panel
1.DIGITAL AUDIO OUT JACKS
•Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2.ANALOG AUDIO OUT JACKS
•Connect to the Audio input jacks of your television, audio/video receiver.
3.VIDEO OUT JACK
•Use a video cable to connect to the Video input jack on your television.
4.
•Use the
5.COMPONENT VIDEO OUT JACKS
•Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video. Along with
The COMPONENT must be selected in the VIDEO OUT SELECT.
6.VIDEO OUT SELECT SWITCH
•Use the switch to set video out. If COMPONENT is selected,
NOTE |
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
10 | 11 |