Samsung DVD-E335/XEL, DVD-E435/XEL, DVD-E234/XEL Setting Up the Audio Options, Setup Menu Changing

Setting Up the Audio Options

Surround Sound Speaker Setup (DVD-E435 only)

1 With the unit in Stop mode, press the MENU button.

2 Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.

3 Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

4 Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button.

Dolby Digital Out

1.PCM :

Converts to PCM(2CH) audio.

Select PCM when using the Analog Audio Outputs.

2.Bitstream :

Converts to Dolby Digital Bitstream (5.1CH).

Select Bitstream when using the Digital Audio Output.

	AUDIO SETUP
Dolby Digital Out	: PCM
MPEG-2 Digital Out	: PCM
DTS	: Off
Dynamic Compression	: On
PCM Down Sampling	: On
Multi Channel Output	: Digital
Speaker Setup

1 With the unit in Stop mode, press the MENU button. 2 Select Setup using UP/DOWN buttons,

then RIGHT or ENTER button.

3 Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

4 Select Multi Channel Output using UP/DOWN buttons. Then select Analog pressing the RIGHT or ENTER button.

5 Use the UP/DOWN buttons to select Speaker Setup. Then press the RIGHT or ENTER button.

6 Use the UP/DOWN or LEFT/RIGHT buttons to select the desired item. Then press the ENTER button.

The default settings : FRONT L, R (Large), CENTER (None), SURROUND (None)

Select the size of the speakers to be connected.

AUDIOAUDIO SETUPSETUP

Dolby Digital Out	: PCM
MPEG-2 Digital Out	: PCM
DTS	: Off
Dynamic Compression	: On
PCM Down Sampling	: On
Multi Channel Output	: Analog
Speaker Setup

NOTE	• Be sure to select the correct Digital Output
	or no audio will be heard.	MPEG-2 Digital Out
	• When Multi Channel Output select Digital.
		1. PCM :
	Dolby & MPEG-2 Digital Out works.

DTS	Converts to PCM(2CH) audio.
	Select PCM when using the Analog
1. Off : Doesn’t output digital signal.	Audio Outputs.
2. On : Outputs DTS Bitstream via digital output only.
	2. Bitstream :
Select DTS when connecting to a DTS Decoder.
	Converts to MPEG-2 Digital
Dynamic Compression
	Bitstream (5.1CH or 7.1CH).
1. On : To select dynamic compression.
	Select Bitstream when using the
2. Off : To select the standard range.
	Digital Audio Output.

PCM Down Sampling

1.On : Select this when the amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ.

2.Off : Select this when the amplifier connected to the player is 96KHz compatible.

In this case, all signals will be output without any changes.

Multi Channel Output (DVD-E435 only)

1.Digital : Select this when using the multichannel digital audio output.

2.Analog : Select this when using the multichannel analog audio output.

Speaker Setup (DVD-E435 only)

•Front (FL, FR)

-Large: Normally select this.

-Small: When the sound cracks or the surround sound effects are difficult to hear, select this. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the speaker from the subwoofer.

•Center

-None: If you do not connect a center speaker, select this.

-Large: Normally select this.

-Small: When the sound cracks, select this. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the center speaker from other speakers.

•Surround (SL, SR)

-None: If you do not connect a center speaker, select this.

-Large (Rear/Side): Normally select either of these according to the rear speaker’s position.

-Small (Rear/Side): When the sound cracks or the surround sound effects are difficult to hear, select either of these according to the rear speaker’s position. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the rear speaker from other speakers.

AUDIOAUDIO SETUPSETUP

Dolby Digital Out	: PCM
MPEG-2 Digital Out	: PCM
DTS	: Off
Dynamic Compression	: On
PCM Down Sampling	: On
Multi Channel Output	: Analog
Speaker Setup

NOTE SETUP MENU CHANGING

•How to make the SETUP menu disappear or return to menu screen during set up.

•How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button.

•Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

•“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Setting up TEST

The test output signals come clockwise starting from the Front Speaker(L). Adjust Channel Balance to match to the volume of test signals memorized in the system.

FRONT(L) CENTER SUBWOOFER FRONT(R)

SURROUND(R) SURROUND(L)

Press RETURN or LEFT button.

•The subwoofer test output signal is lower than the other speakers.

•The MPEG Multichannel logo is a trademark registered by PHILIPS Corporation.

44

45

ENGENG