Rear Panel (DVD-F1080)

1.DIGITAL AUDIO OUT JACKS

-Use coaxial digital cable to connect to a compatible Dolby Digital receiver.

-Use coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.

2.COMPONENT VIDEO OUT JACKS

-Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video.

-If P-SCAN Video Output is selected in Setup Menu, progressive scan mode will work.

-If I-SCAN Video Output is selected in Setup Menu, interlaced scan mode will work.

3.AUDIO OUT JACKS

English

4.VIDEO OUT JACK

-Use a video cable to connect to the Video input jack on your television.

5.AC IN JACK

-Use AC IN cable(Included) to connect this jack into the power outlet.

6.HDMI OUT JACK

-Use the HDMI cable to connect this jack to the HDMI jack on your television for the best quality picture.

-If an HDMI cable is connected to an HDMI-compati- ble TV, HDMI will be output automatically within 10 seconds.

-Connect to the Audio input jacks of your television or audio/video receiver.

Note

-Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

-The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conver- sion adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input (DVD-F1080 only).

-There may be no image output if the DVD player is connected to a TV or display that is not compatible with the above format.

-Refer to the TV's instruction manual for detailed information regarding the HDMI terminal (DVD-F1080 only).

-See pages 27 ~ 28 to get more information on how to use the setup menu.

7