Samsung DVD-FP580, DVD-F1080 manual Connecting to a TV Video, ENG-16

C O N N E C T I O N S

Connecting to a TV (Video)

1

Using Video/Audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT jacks on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV.

2

Turn on your DVD player and TV.

3

Press the input selector button on your TV remote control until the Video signal from the DVD player appears on the TV screen.

RED	WHITE	YELLOW
	Audio Cable	Video Cable
	(Included)	(Included)
RED	WHITE	YELLOW

Note

-Noise may be generated if the audio cable placed too close to the power cable.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)

-The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual of your TV.

-If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) jack of the DVD player.

-If you press the VIDEO SEL. button when the DVD Player is in play mode, stop mode or no disc is inserted, the Video Output mode changes in the following sequence: ( I-SCAN ➝ P-SCAN).

When HDMI is connected, these output modes will not appear.

ENG-16