Samsung DVD-H1080R, DVD-H1080W user manual Hdmi

The following describes each option found in the Audio Setup Menu.

❶Dolby Digital Out

-PCM : Converts to PCM(2CH) audio.

-Bitstream : Outputs Dolby Digital via digital output.

Select Bitstream when connecting to a Dolby Digital Decoder.

❷MPEG2 Digital Output

-PCM : Converts to PCM (2CH) audio.

-Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or 7.1 CH). Select Bitstream when

using the Digital Audio Output. Note

When playing a disc that has MPEG Audio and bitstream is selected, depending on your AV receiver,the coaxial Digital Audio jack may not output audio.

❸Dynamic Compression

-On : To select dynamic compression. This is useful for watching movies late at night, as it balances the loud and quiet portions of a disc.

-Off :To select the standard range.

❹PCM Down Sampling

-On : Select this when the Amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ.

-Off :Select this when the Amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes.

❺Power Music On

-On : To turn On Start up music.

-Off : To turn Off Start up music. Note

Even when PCM Down sampling is Off, some discs will only output down-sampled audio through the digital outputs.

HDMI

-If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS, MPEG), you should set Digital Audio to PCM.

-If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down sampling to On.

Note

•To make the Setup menu disappear, press the MENU button.

•There is no analog audio output when you play a DTS disc. You must make a Digital audio connection Coaxial.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

● NAVIGATING THE SETUP MENU

English _51