Samsung DVD-H1080R, DVD-H1080W Description, Front Panel Controls Getting started, Rear Panel

Models: DVD-H1080W DVD-H1080R

1 67
Download 67 pages 58.46 Kb
Page 9
Image 9

Description

Front Panel Controls

getting started

1.STANDBY/ON ( )

When STANDBY/ON is pressed on, the indicator goes out and the player is turned on.

2.STANDBY Indicator

When the unit is first plugged in, the indicator lights.

3.DISC TRAY Place the disc here.

4.OPEN/CLOSE /STOP ( )

Press to open and close the disc tray/ Stops disc play.

5.PLAY/PAUSE ( ) Begin or pause disc play.

Rear Panel

1.DIGITAL AUDIO OUT JACKS

-Use either an coaxial digital cable to connect to a compatible Dolby Digital receiver.

-Use a coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.

2.COMPONENT VIDEO OUT JACKS

-Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video.

-If P-SCAN is set to “ON” in Video Output of the Setup Menu, progressive scan mode will work.

-If I-SCAN is set to “ON” in Video Output of the Setup Menu, interlaced scan mode will work.

3.AUDIO OUT JACKS

-Use audio cables to connect to the Audio input jacks of your television or audio/video receiver.

4.VIDEO OUT JACK

-Use a video cable to connect to the Video input jack on your television.

5.HDMI OUT JACK

-Use an HDMI cable to connect this jack to the HDMI jack on your television for the best quality picture.

-If an HDMI cable is connected to an HDMI-compatible TV, HDMI will be output automatically from the player about 10 seconds later.

6.USB Host

-Connect a digital still camera, MP3 player, memory stick, Card reader and other removable storage devices.

English _

Page 9
Image 9
Samsung DVD-H1080R, DVD-H1080W user manual Description, Front Panel Controls Getting started, Rear Panel