ENG-23
SACD Playback

SACD Clips Menu Off Play Function

1.In Stop mode, press the DISC MENU button until
the Clips menu is off.
2.During playback, press the INFO button and the
screen below appears.
3.Use the UP/DOWN buttons to select the desired
item.
4.Use the LEFT/RIGHT buttons to make the
desired setup and then press ENTER.
• You may use the number buttons of the remote
control to directly access a track and to start the
playback from the desired time.
5.To make the screen disappear, press the INFO
button again.

CD Layer Play Function

During SACD playback, press the SACD/CD button
to playback the CD layer of a dual layer SACD disc.
(Refer to the page 14 for setting CD playback
Function).
Note
• Some SACD discs do not include a CD layer.
• Depending on a disc, this function may not work.
SACD
Time
Audio
01
0:00:13
MULTI
Track
CD
Time
01
0:00:13
Track
To access the desired Track when there
is more than one in the disc.
Allows playback from a desired time by
using the number buttons.
If you want to change the 2channel or
multi channel in play or stop mode,
press AUDIO button.
- You can use this function when SACD
disc includes multi channel and 2
channel audio format.
• 2CH :L, R
• MULTI :F/L, F/R, R/L, R/R, C/T, S/W
To access the desired Track when there
is more than one in the disc.
Allows playback from a desired time.
You must enter the starting time as a
reference.
ENG-22
Using the Zoom Function

Using the Zoom Function (DVD/VCD)

1.During play or pause mode, press the ZOOM
button on the remote.
A Zoom mark will be displayed on screen.
2.Use the UP/DOWN or LEFT/RIGHT buttons to
select the part of the screen you want to zoom in
on.
3.Press the ENTER button.
- During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
- During VCD play, press ENTER to zoom in 2X/Normal
in order.
SACD PlaybackSACD Playback
1.Open the disc tray.
2.Place the SACD disc on the tray.
- Place the SACD disc with the labeled side up.
3.Close the tray.
- The tray closes and you should get a screen
that looks like the one below.

SACD Clips Menu On Play Function

1.Use the UP/DOWN buttons to select a music title.
2.Press the ENTER button to begin playback of the
music title.
- If you want to use the Repeat Function, press the
REPEAT button to change the mode, such as Off,
Track, Disc.
*Off :Normal Playback
*Track :Repeats the current music title.
*Disc :Repeats the music titles in the SACD.
- If you want to see information about the Disc title
and Artist, press the INFO button.
- If you want to convert into regular CD mode,
press the SACD/CD button.
- During play or stop mode, you can change the
2CH or MULTI mode by using LEFT/RIGHT
buttons.(You can use this function when SACD
disc includes multi channel and 2 channel audio
format.)
00:00:23 2CH MULTI
OffSACD
001.West Side Story : MUSIC 1
001.West Side Story : MUSIC 1
002.West Side Story : MUSIC 2
003.West Side Story : MUSIC 3
004.West Side Story : MUSIC 4
005.West Side Story : MUSIC 5
006.West Side Story : MUSIC 6