ENG-33ENG-32
1.
With the unit in Stop mode, press the MENU button.
2.Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3.Select Audio Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
4.Use the UP/DOWN buttons to select the desired
item.Then press the RIGHT or ENTER button.
Dolby Digital Output
1.PCM : Converts to PCM(2CH) 48kHz audio.Select
PCM when using the Analog Audio Outputs.
2.Bitstream : Converts to Dolby Digital Bitstream
(5.1CH).Select Bitstream when using the
Digital Audio Output.
Note Even when PCM Down sampling is Off
•Some discs will only output down sampled
audio through the digital outputs.
•High sampling rate DVD-Audio discs
(192KHz or 176.4KHz) always output audio
down sampled to 96KHz or 88.2KHz through
the digital outputs.
•When playing LPCM or PPCM DVD
protected by copyright.If digital audio source
is 48KHz/16bit the Digital output is mute.
MPEG-2 Digital Out
1.PCM : Converts to PCM(2CH) audio.Select PCM
when using the Analog Audio Outputs.
2.Bitstream : Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH).Select Bitstream when
using the Digital Audio Output.
Setting Up the Audio OptionsSetting Up the Audio Options
AUDIO SETUP
DTS : Off
Dynamic Compression : On
PCM Down Sampling : On
Speaker Setup
Dolby Digital Output : PCM
MPEG-2 Digital Out : PCM
DTS
1.Off : Doesn’t output digital signal.
2.On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
Note There is no analog audio output when you play
DTS sound disc.
Dynamic Compression
1.On : To select dynamic compression.
2.Off : To select the standard range.
PCM Down Sampling
1.On : Select this when the amplifier connected to the
player is not 96KHz compatible.In this case, the
96KHz signals will be down converted to 48KHZ.
2.Off : Select this when the amplifier connected to the
player is 96KHz compatible.In this case, all
signals will be output without any changes.
Speaker Setup (See pages 33~34)
Note
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
• Manufactured under license from Dolby
Laboratories.“Dolby”and the double-D symbol are
trademarks of Dolby Laboratories.
• “DTS”and “DTS Digital Out”are trademarks of
Digital Theater Systems, Inc.
• DVD-AUDIO
- Outputs 2 channel digital audio only.
- Some DVD-AUDIO discs do not downmix, so they
will not output 2 channel digital audio.
- MULTI channel DVD-AUDIO discs play back
through the analog outputs.
• SACD
Outputs analog signals only.
Setting Up the Language Features

Using the Subtitle Language

1.With the unit in Stop mode, press the MENU
button.
2.Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3.Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
4.Select Subtitle using UP/DOWN buttons, then
press the RIGHT or ENTER button.
5.Use the UP/DOWN buttons to select the desired
language.
- Select “Automatic”if you want the subtitle language to
be the same as the language selected as the audio
preference.
- Select “Others”if the language you want is not listed.
Some discs may not contain the language you select
as your initial language;in that case the disc will use its
original language setting.
6.Press the ENTER button.
- The language is selected and the screen returns to
Language Setup menu.
Note
• If the selected language is not recorded on the
disc, the original pre-recorded language is
selected.
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
SUBTITLE LANGUAGE
Others
Subtitle
Automatic
1.With the unit in Stop mode, press the MENU
button.
2.Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3.Select Audio Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
4.Use the UP/DOWN buttons to select Speaker
Setup.Then press the RIGHT or ENTER button.
5.Use the UP/DOWN or LEFT/RIGHT buttons to
select the desired item.Then press the ENTER
button.
Surround Sound Speaker Setup
AUDIO SETUP
DTS : Off
Dynamic Compression : On
PCM Down Sampling : On
Speaker Setup
Dolby Digital Output : PCM
MPEG-2 Digital Out : PCM
SPEAKER SETUP
On