ENG-29ENG-28
1.
With the unit in Stop mode, press the MENU button.
2. Select Setupusing UP/DOWN buttons, then
RIGHTor ENTER button.
3. Select Audio Setupusing UP/DOWN buttons,
then press the RIGHTor ENTER button.
4. Use the UP/DOWN buttons to select the desired
item. Then press the RIGHTor ENTER button.
Digital Output
1. PCM : Converts to PCM(2CH) 48kHz audio. Select
PCM when using the Analog Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream
(5.1CH). Select Bitstream when using the
Digital Audio Output.
Note
Note • Be sure to select the correct Digital Output or
no audio will be heard.
DTS
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
Setting Up the Audio Options
AUDIO SETUP
DTS : Off
Dynamic Compression : On
PCM Down Sampling : On
Digital Output : PCM
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
PCM Down Sampling
1. On : Select this when the amplifier connected to the
player is not 96KHz compatible. In this case, the
96KHz signals will be down converted to 48KHZ.
2. Off : Select this when the amplifier connected to the
player is 96KHz compatible. In this case, all
signals will be output without any changes.
Note
Note
• How to make the SETUPmenu disappear or
return to menu screen during set up;
Press RETURN or LEFTbutton.
• Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Setting Up the Language Features

Using the Audio Language

1. With the unit in Stop mode, press the MENU
button.
2. Select Setupusing UP/DOWN buttons, then
RIGHTor ENTER button.
3. Select Language Setupusing UP/DOWN
buttons, then press the RIGHTor ENTER button.
4. Select Audiousing UP/DOWN buttons, then
press the RIGHTor ENTER button.
5. Press the UP/DOWN buttons to select ‘English’.
- Select “Original” if you want the default soundtrack
language to be the original language the disc is
recorded in.
- Select “Others” if the language you want is not listed.
6. Press the ENTER button.
- English is selected and the screen returns to SETUP
menu.

Using the Subtitle Language

1. With the unit in Stop mode, press the MENU
button.
2. Select Setupusing UP/DOWN buttons, then
RIGHTor ENTER button.
3. Select Language Setupusing UP/DOWN
buttons, then press the RIGHTor ENTER button.
4. Select Subtitleusing UP/DOWN buttons, then
press the RIGHTor ENTER button.
5. Use the UP/DOWN buttons to select ‘English’.
- Select “Automatic” if you want the subtitle language to
be the same as the language selected as the audio
preference.
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you select
as your initial language; in that case the disc will use its
original language setting.
6. Press the ENTER button.
- English is selected and the screen returns to SETUP
menu.
Note
Note
• If the selected language is not recorded on the
disc, the original pre-recorded language is
selected.
• How to make the SETUPmenu disappear or
return to menu screen during set up;
Press RETURN or LEFTbutton.
AUDIO LANGUAGE
Original
Others
Audio