Chapter 6
R E F E R E N C E
Firmware upgrade
Introduction
Upgrading the Firmware will keep your DVD player up to date.
The latest firmware version for this unit is provided on the Samsung Website.(www.samsung.com).
How to make an upgrade disc
You must burn the latest firmware version onto a blank
1.Download a new file from
Samsung’s website (www.samsung.com) Download center
2.Write the file to Disc using the
Note
The CD should be burned following specs below.
-File System
-Character set ISO 9660.
-The burned CD has to be Finalized.
-Please burn the CD at a low speed.
Upgrade procedure
1.Open the disc tray.
Place the burned disc on the tray,close the tray. The Firmware upgrade screen will appear.
Upgrade file detected
Curent version: 07.12.15.00
Upgrade ?
Press Play to start
Firmware upgrade
menu appears
2.Press enter or play to start upgrade
-Other buttons on remote control to cancel upgrade and eject the disc (eg. 
etc).
Upgrade file detected
Curent version: 07.12.15.00
Upgrade ?
Press Play to start
File copying
Firmware upgrade starts
Upgrade file detected
Curent version: 07.12.15.00
Upgrade ?
Press Play to start
Upgrade
Firmware upgrade starts
-During the firmware upgrade process, the tray will open.
Please remove the disc and wait for about 2 minutes.
-If the DVD player was successfully updated, the disc tray will close and the unit will turn off and on.
When the unit turns on, the Select Menu Language screen will appear.
3.Press the number buttons to select the desired language.
SELECT MENU LANGUAGE
Press | 1 | for English |
Touche | 2 | pour Français |
Drücken Sie | 3 | für Deutsch |
Pulsar | 4 | para Español |
Premere | 5 | per Italiano |
Druk op | 6 | voor Nederlands |
|
|
|
|
|
|
Note
-If the “Select Menu Language” doesn’t appear, please contact Samsung Customer Service. (see page 57)
-Do not press any button or unplug the power cord during the upgrade.
-The upgrade procedure may change, refer to the web site (www.samsung.com).
