reference

Firmware upgrade

Introduction

Samsung will often support the software upgrade to improve the performance of this unit to the latest sta- tus, through Samsung Internet Site (www.samsung. com).

What improvements are made depends on the upgrade software you are using as well as the software that your DVD-player contained before the upgrade.

How to make an upgrade disc

Write the downloaded file onto a blank CD-R or CD- RW disc, using the following settings:

1.You have to download a new file through Download Center of Samsung Internet Site (www.samsung.com).

2.Write the file to Disc using CD-RW of your computer.

Note

-File System CD-ROM ISO Level-Character set ISO 9660-Finalized, single session-Write speed lowUpgrade procedure

1.Open the disc tray. Place the disc on the tray. Close the tray. The Firmware upgrade screen appears.

Old Version : 090218.00.B.P490K2XSG

New Version : 090225.01.B.P490K2XSG

Firmware upgrade

appears on the display

2.Press the √/® buttons to select Total, then press the ENTER button.

Old Version :090218.00.B.P490K2XSG

New Version : 090225.01.B.P490K2XSG

Firmware upgrade starts

-In the middle of the writing, the tray will open automatically. After taking out the disc, please wait for about 2 minutes.

-If the unit was succesfully updated, the unit will turn off and on after closing the tray automatically. When the unit turns on, this screen will display.

3.Press the π/† buttons then press ENTER button to select the desired language

English

ﺔﯿﺑ ﺮﻋ

Note

-If the “Select Menu Language” doesn’t appear, please contact to “Samsung Service Center”.

-Do not press any button and unplug the power cord during upgrade.-The upgrade procedure may change, refer to the web site (www.samsung.com).

EFER ● RNCE E

English _29