ENG-23ENG-22
MP3/WMA Playback MP3/WMA Playback
1.Open the disc tray.
2.Place the disc on the tray.
- Place the disc with the labeled side up.
3.Close the tray.
- The tray closes and you should get a screen
that looks like the one below.

MP3/WMA Play Function

1.Select the desired folder.
2.Use the UP/DOWN or LEFT/RIGHT buttons to
select a song file.
3.Press ENTER to begin playback of the song file.

Repeat/Random playback

Press the REPEAT button to change playback
mode.There are 4 modes, such as Off, Track,
Folder and Random.
- Off :Normal Playback
- Track :Repeats the current song file.
- Folder :Repeats the song files which have the
same extension in the current folder.
- Random :Song files which have the same
extension will be played in random
order.
* To resume normal play, press the CLEAR button.

CD-R MP3/WMA file

When you record MP3 or WMA files on CD-R,
please refer to the following.
• Your MP3 or WMA files should be ISO 9660 or JOLIET
format.
ISO 9660 format and Joliet MP3 or WMA files are
compatible with Microsoft's DOS and Windows, and with
Apple's Mac.This format is the most widely used.
• When naming your MP3 or WMA files,do not exceed 8
characters,and enter “.mp3, .wma”as the file
extension.
General name format of:Title.mp3. or Title.wma.
When composing your title, make sure that you use 8
characters or less, have no spaces in the name, and avoid
the use of special characters including:(.,/,\,=,+).
• Use a decompression transfer rate of at least 128
Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate
of compression/decompression you choose.Getting CD
audio sound requires an analog/digital sampling rate, that
is conversion to MP3 format, of at least 128 Kbps and up
to 160 Kbps.However, choosing higher rates, like 192
Kbps or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128
Kbps will not be played properly.
• Use a decompression transfer rate of at least 64Kbps
when recording WMA files.
Sound quality with WMA files basically depends on the
rate of compression/decompression you choose.
Getting CD audio sound requires an analog/digital
sampling rate, that is conversion to WMA format, of at
least 64Kbps and up to 192Kbps.
Conversely, files with decompression rates below 64Kbps
or over 192Kbps will not be played properly.
•
Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected
to prevent illegal copying.These files are of the following
types:Windows MediaTM (registered trade mark of
Microsoft Inc) and SDMITM(registered trade mark of The
SDMI Foundation).You cannot copy such files.
• Important:The above recommendations cannot be taken
as a guarantee that the DVD player will play MP3
recordings, or as an assurance of sound quality.You
should note that certain technologies and methods for
MP3 file recording on CD-Rs prevent optimal playback of
these files on your DVD player (degraded sound quality
and in some cases, inability of the player to read the files).
• This unit can play a maximum of 3000 files and 300
folders per disc.
Folder Selection

The folder can only be selected in the Stop

mode.

• To select the Parent Folder
Press the RETURN button to go to parent folder,
or use the UP/DOWN buttons to select “..”and
press ENTER to go to the parent folder.
• To select the Peer Folder
Use the LEFT/RIGHT buttons to highlight left
window.Use the UP/DOWN buttons to select the
desired folder, then press ENTER.
• To select the Sub-Folder
Use the LEFT/RIGHT buttons to highlight right
window.Use the UP/DOWN buttons to select the
desired folder, then press ENTER.
Root
WMA
JPEG
MP3
SONG FILE 3
MPEG4 FILES
MUSIC
SONG FILE 1
SONG FILE 2
1st
2nd
Parent Folder
Current Folder
Sub-Folders
Peer Folders
MPEG4 Playback
1.Open the disc tray.
2.Place the disc on the tray.
- Place the disc with the labeled side up.
3.Close the tray.
- The tray closes and you should get a screen
that looks like the one below.

MPEG4 Play Function

AVI files are used to contain the audio and video
data.Only AVI format files with the “.avi”extensions
can be played.
1.Select the desired folder. (See page 22 to select
the folder)
2.Use the UP/DOWN or LEFT/RIGHT buttons to
select an avi file (DivX/XviD) and then press the
ENTER button.

Repeat Playback

Press the REPEAT button to change playback
mode.There are 4 modes, such as Off, Folder, Title
and A-B (a distance between two points appointed
by user).
• Folder ( ) :repeats the AVI files which have the same
extension in the current folder.
• Title ( ) :repeats the title that is playing.
• A-B :repeats a segment of the file that you select.
Off FD 01A - B
REPEAT
ENTER
TF
F
T