ENG-29ENG-28
1.
With the unit in Stop mode, press the MENU button.
2.Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3.Select Audio Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
4.Use the UP/DOWN buttons to select the desired
item.Then press the RIGHT or ENTER button.
Dolby Digital Output
1.PCM : Converts to PCM(2CH) 48kHz audio.Select
PCM when using the Analog Audio Outputs.
2.Bitstream : Converts to Dolby Digital Bitstream
(5.1CH).Select Bitstream when using the
Digital Audio Output.
Note • Be sure to select the correct Digital Output or
no audio will be heard.
MPEG-2 Digital Out
1.PCM : Converts to PCM(2CH) audio.Select PCM
when using the Analog Audio Outputs.
2.Bitstream : Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH).Select Bitstream when
using the Digital Audio Output.
Setting Up the Audio Options Setting Up the Audio Options
DTS
1.Off : Doesn’t output digital signal.
2.On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
Note There is no analog audio output when you play
DTS sound disc.
Dynamic Compression
1.On : To select dynamic compression.
2.Off : To select the standard range.
PCM Down Sampling
1.On : Select this when the amplifier connected to the
player is not 96KHz compatible.In this case, the
96KHz signals will be down converted to 48KHZ.
2.Off : Select this when the amplifier connected to the
player is 96KHz compatible.In this case, all
signals will be output without any changes.
Note
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
• Manufactured under license from Dolby
Laboratories.“Dolby”and the double-D symbol are
trademarks of Dolby Laboratories.
• “DTS”and “DTS Digital Out”are trademarks of
Digital Theater Systems, Inc.
Setting Up the Language Features

Using the Subtitle Language

1.With the unit in Stop mode, press the MENU
button.
2.Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3.Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
4.Select Subtitle using UP/DOWN buttons, then
press the RIGHT or ENTER button.
5.Use the UP/DOWN buttons to select the desired
language.
- Select “Automatic”if you want the subtitle language to
be the same as the language selected as the audio
preference.
- Select “Others”if the language you want is not listed.
Some discs may not contain the language you select
as your initial language;in that case the disc will use its
original language setting.
6.Press the ENTER button.
- The language is selected and the screen returns to
Language Setup menu.
Note
• If the selected language is not recorded on the
disc, the original pre-recorded language is
selected.
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
SUBTITLE LANGUAGE
Others
Subtitle
Automatic
Setting Up the Display Options
1.
With the unit in Stop mode, press the MENU button.
2.Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3.Select Display Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
4.Use the UP/DOWN buttons to select the desired
item.Then press the RIGHT or ENTER button.
TV Aspect
Depending on a type of television you have, you may
want to adjust the screen setting (aspect ratio).
1.4:3 Letter Box : Select when you want to see the total
16:9 ratio screen DVD supplies, even though you have
a TV with a 4:3 ratio screen.Black bars will appear at
the top and bottom of the screen.
2.4:3 Pan Scan : Select this for conventional size TVs
when you want to see the central portion of the 16:9
screen.(Extreme left and right side of movie picture
will be cut off.)
3.16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
TV ASPECT
4:3 Pan Scan
16:9 Wide
4:3 Letter Box