reference
Firmware upgrade
Introduction
Samsung will often support the software upgrade to improve the performance of this unit to the latest sta- tus, through Samsung Internet Site (www.samsung. com).
What improvements are made depends on the upgrade software you are using as well as the software that your
How to make an upgrade disc
Write the downloaded file onto a blank
1.You have to download a new file through Download Center of Samsung Internet Site (www.samsung.com).
2.Write the file to Disc using
Note
-File System
-Character set ISO 9660
-Finalized, single session
-Write speed low
Upgrade procedure
1.Open the disc tray. Place the disc on the tray. Close the tray. The Firmware upgrade screen appears.
090131.R4.B.P490K2XEG 
090319.02.B.P490K2XEG
2.Press the √/® buttons to select Total, then press the ENTER button.
090131.R4.B.P490K2XEG 
090319.02.B.P490K2XEG
Firmware upgrade starts
-In the middle of the writing, the tray will open automatically. After taking out the disc, please wait for about 2 minutes.
-If the unit was succesfully updated, the unit will turn off and on after closing the tray automatically. When the unit turns on, this screen will display.
3.Press the π/† buttons then press ENTER button to select the desired language
English
Français
Deutsch
Español
Italiano
Nederlands
Note
-If the “Select Menu Language” doesn’t appear, please contact to “Samsung Service Center”.
-Do not press any button and unplug the power cord during upgrade.
-The upgrade procedure may change, refer to the web site (www.samsung.com).
Firmware upgrade
appears on the display
30_ reference
