CO N N E C T I O N S

Connection to a TV (Interlace)

-Connecting to your TV using Component video cables.

-You will enjoy high quality and accurate color reproduction images. Component video separates

the picture element into black and white(Y), blue(P

B ), red(P R ) signals to present clear and clean

images. (Audio signals are delivered through the audio output.)

 

Connections

1

Using component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD

player to the COMPONENT IN terminals of your TV.

2

Using the audio cables, connect the

AUDIO (red and white)

OUT terminals on the rear of the DVD player to the

AUDIO (red

and white) IN terminals of your TV.

 

 

Turn on the DVD player and TV.

 

 

3

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

RED BLUE GREEN

 

 

RED

WHITE

 

 

Audio Cable

 

 

 

 

Component cable

 

 

 

(not included)

RED

WHITE

RED BLUE

GREEN

4

Set the Video Output to Component (I-SCAN)in the Display

Setup menu. (See pages 52 to 53)

Note

-If Video output is incorrectly set to COMPOSITE/S-VIDEO with the Component cables connected, the screen will turn red.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)

- The component terminal of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “P

R , PB , Y”

depending on the manufacturer. The number and position of terminals may vary depending on the TV set.

 

Please refer to the user's manual of your TV.

 

ENG-13