Samsung DVD-P350K/SAM Connection to a TV Interlace, Picture element into black and whiteY, blueP

CO N N E C T I O N S

Connection to a TV (Interlace)

-Connecting to your TV using Component video cables.

-You will enjoy high quality and accurate color reproduction images. Component video separates

the picture element into black and white(Y), blue(P	B ), red(P R ) signals to present clear and clean
images. (Audio signals are delivered through the audio output.)

Connections

1

Using component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD

player to the COMPONENT IN terminals of your TV.

2

Using the audio cables, connect the	AUDIO (red and white)
OUT terminals on the rear of the DVD player to the		AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.

3

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

4

Set the Video Output to Component (I-SCAN)in the Display Setup menu. (See pages 52 to 53)

			RED	BLUE	GREEN
		RED		WHITE
		Audio Cable
					Component cable
		RED	BLUE	GREEN	(not included)
RED	WHITE

Note

-If Video output is incorrectly set to COMPOSITE/S-VIDEO with the Component cables connected, the screen will turn red.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)

- The component terminal of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “P	R , PB , Y”
depending on the manufacturer. The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.

ENG-13