Samsung DVD-P375/AFR manual Connection to a TV Progressive, To see the progressive video output

Connection to a TV (Progressive)

1

Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.

3

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

				RED	BLUE	GREEN
		RED		WHITE
			Audio Cable
					Component cable
RED	WHITE	RED	BLUE	GREEN	(not included)

4

Set the Video Output to P-SCANin the Display Setup menu. (See pages 27)

To see the progressive video output,

-YouConsultneed ayourTV setTVsuppoUser’stingManualthe progressiveto find outscanif your TV supports Progressive Scan. If Progressive inputScan isfunctionsupported,. And youfollowhavetheto setTV upUser’sthe TVManual regarding Progressive Scan settings in the TV’s

menu system.

- Depending on your TV, the connection method may differ from the illustration above.

Note

-What is "Progressive Scan"?

Progressive scan has twice as many scanning lines as the interlace output method has. Progressive scanning method can provide better and clearer picture quality.

12