Samsung DVD-P650K/XEE manual Turn on the DVD player, TV, and Amplifier, Audio input

CO N N E C T I O N S

Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)

1

If using an optical cable (not included), connect the	DIGITAL
AUDIO OUT (OPTICAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier.
If using a coaxial cable (not included), connect the	DIGITAL

AUDIO OUT (COAXIAL) terminal on the rear of the DVD player

to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.

2

Using the video signal cable(s), connect theVIDEO, S-VIDEOor COMPONENT terminals on the rear of the DVD player to the

VIDEO, S-VIDEO or COMPONENT terminals of your TV as described on pages 11 to 14.

3

Turn on the DVD player, TV, and Amplifier.

or	Coaxial Cable
	(not included)

Optical Cable (not included)

Dolby digital or

DTS amp

4

Press the input select button of the Amplifier to select	external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.

Note

-Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.

-Please set the audio in the menu screen according to the Amplifier. (See pages 62 to 63)

-The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.

-Please remove the dust cover before using the optical cable (not included) and put the cover on the cable again when it's not used.

-DVD-AUDIO only plays back two channel audio through the Digital Audio out. Multi-channel DVD-Audio discs are output through the Analog outputs.

-SACD plays back only through the Analog outputs. (See pages 62 to 63)

ENG-16