Samsung DVD-R120/EUR manual Case 3 Component Video output jacks, Make sure that the color coded

Case 3 : Component Video output jacks

1.Connect Component video cables(not supplied) between the COMPONENT OUT(Y,PB,PR) jacks on

DVD Recorder and COMPONENT IN(Y,PB,PR) jacks on your TV.

2.Connect audio cables (white and red) between the AUDIO OUT jacks on the DVD Recorder and AUDIO IN jacks on TV (or AV amplifier).

(See pages 21 to 22).

3.After connecting, refer to the page 35 to 36.

●You will enjoy high quality and accurate color reproduction images.

2

Other type of connecting the Audio output cable

There are several ways to output audio signal not using scart cables. Select the audio connection that best suits you below.

●Case 1 : Connecting to your TV

●Case 2 : Connecting to a stereo amplifier with AV output jacks

●Case 3 : Connecting to an AV amplifier with a digital output jack

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Connecting & Setting Up

COMPONENT	green	red	blue	green	Case 1 : Connecting to your TV
					If your TV has audio input jacks, use this connection.
Y		1
	blue
Pb
	red
Pr

■ Make sure that the color coded

NOTEconnections match. The Y, PB, PR component output jacks of your DVD Recorder must be connected to the exact corresponding component input jacks on your TV.

■Progressive setting is only available when the Video Out is set to Component.

(See page 36)

yellow

white

red

red white yellow

English -21