Samsung DVD-R121/EUR …† buttons to, Using the Menu button, OK button, Press OK or √ button twice

Recording

Using the ShowView Feature

Before presetting your DVD Recoder:

•Switch on both the television and your DVD Recoder.

•Check that the date and time are correct.

Up to twelve programmes can be preset.

1	With the unit in Stop mode, press the
	TIMER button. Press the	…† buttons to
	select ShowView, then press the		OK or √
	button.

●A message is displayed to allow you to enter the ShowView code.

DVD-RAM(VR)

Disc Navigation

Playlist

Enter ShowView Code number. [0~9]

Disc manager

Programme

Setup

OK RETURN EXIT

Using the MENU button.

●	With the unit in Stop mode, press the		MENU
	button.
●	Press the	…† buttons to select	Programme, then
	press the	OK or √ button twice.

2 Press the number buttons to enter the code of the programme that you want to record in your television magazine.

●If you want to correct the ShowView code that you are entering:

●Press the œ button until the digit to be corrected is cleared.

●Enter the correct digit.

3	Press the			OK button.
	● The information concerning the programme is
	displayed.
	● When using the ShowView function for the
	first time with stored stations, the programme
	number flashes. This one time, you must enter
	the PR number manually by pressing the
	…† buttons or number buttons.
		DVD-RAM(VR)					Scheduled Record List
						Recordable Time 02:12 SP
			No. Source		Date	Start	End	Mode	V/P	Edit
						No. 01
				Source	Date	Start	End	Mode	V/S
				PR 01	01/JAN(SAT)	12 : 00	14 : 00	SP	Off
				Recorda	ble Time 02:12 SP
		MOVE			OK		RETURN			EXIT
		DVD-RAM(VR)					Scheduled Record List
						Recordable Time 02:12 SP
			No. Source		Date	Start	End	Mode	V/P	Edit
			01	PR 01	01 JAN	12 : 00	14 : 00	SP	Off	√
			02	-- --	-- - --	--:--	--:--	--	--	√
		MOVE			OK		RETURN			EXIT
	If the programme and times are correct,
4 press the			OK button.

5 Turn the power off by pressing the STANDBY/ON button to activate the timer recoding setting.

6 Refer to pages 47~49 if you want to: ● Check whether the timer Recording has set

correctly or not.

● Cancel a preset recording

■ The numbers next to each TV programme

NOTElisting in the magazines or newspapers are ShowView code numbers, which allow you to programme your DVD Recorder instantly with the remote control. Enter the ShowView code for the programme you wish to record.

■ShowView is a trademark of Gemstar Development Corporation. The ShowView system is manufactured under licence from Gemstar Development Corporation.

50- English