■ Press the RETURN or œ button to return
NOTEto the previous menu. Press the MENU button to exit the menu.
Display(Video) OptionsThis function depends on disc type. It may not work for some disc types.
TV Aspect
Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio)
|
| Video | |||
No Disc |
|
|
|
|
|
Programme | TV Aspect |
| 4:3 LetterBox |
| |
Setup | 3D Noise | ||||
| HDMI/DVI Resolution | 16:9 Wide |
|
| |
| DivX(R) Registration |
| √ | ||
|
|
|
|
| |
MOVE | OK | RETURN | EXIT | ||
|
|
|
|
|
|
•4:3 LetterBox : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.
•4:3
•16:9 Wide : You can view the full 16:9 picture on your widescreen TV.
3D Noise Reduction (motion adaptive noise reduction)
|
| Video | ||
No Disc |
|
|
|
|
Programme | TV Aspect |
| : 16:9 Wide | √ |
Setup | 3D Noise Reduction | Off |
| |
| HDMI/DVI Resolution | On |
| |
| DivX(R) Registration |
| √ | |
MOVE | OK | RETURN | EXIT |
●On : Provides a cleaner picture through noise reduction (for recording).
●Off : Normal
HDMI/DVI Resolution
This setting is used when the DVD Recorder is connected by HDMI or DVI with Display devices (TV, projector, etc).
|
| Video | ||
No Disc |
|
|
|
|
Programme | TV Aspect |
| : 16:9 Wide | √ |
Setup | 3D Noise Reduction : Off | √ | ||
| HDMI/DVI Resolution | 576p |
| |
| DivX(R) Registration | 720p |
| |
|
|
| 1080i |
|
|
|
|
|
|
MOVE | OK | RETURN | EXIT | |
|
|
|
|
|
•576p : 720 x 576
•720p : 1280 x 720
•1080i : 1920 x 1080
■ Menu screen will zoom out to 2/3 at
NOTE1080i.
Output selection•Connect the DVD Recorder to your TV via a HDMI or DVI cable. And set your TV's input to HDMI.
•Press the P.SCAN button while the DVD Recorder is in Stop mode to select the HDMI output resolution as follows:
➞ 576p ➞ 720p ➞ 1080i
| ■ Progressive scan automatically activates |
NOTE | when HDMI is connected. |
■There will be no HDMI video and audio outputs unless progressive scan function is activated.
■Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.
■The resolutions available for HDMI/DVI output depend on the connected TV or projector. For details, see the user’s manual of your TV or projector.
■When the resolution is changed it may take a few seconds for a normal image to appear.
■If you set the HDMI output resolution 720p or 1080i, HDMI output provides better picture quality.
■DivX playback screen output can only be done in 576p.
Setup ystemS
English