Connecting & Setting Up
English - 16
Step 2 : Connecting HDMI/DVI to a TV
If your TV has a HDMI/DVI input, connect the HDMI/DVI cable to the TV. You will enjoy the best quality image and
sound.

Connecting to a TV with HDMI Jack

Using an HDMI-HDMI cable (not included) connect the HDMI OUT jack on the rear of the DVD Recorder to the
HDMI IN jack of your TV. Press the input selector on your TV remote control until the HDMI signal from the DVD
Recorder appears on your TV screen.
To listen to sound output via HDMI, you must set
the digital audio output to PCM. (See page 32)
Depending on the HDMI device(TV/HDMI
Receiver) you use, audio may not be supported.
If your TV does not support Dolby digital/DTS,
Audio output is not available when you set the
Digital output to Bitstream or select DTS On in
the Audio setup menu. In this case, set the digital
audio ouput to PCM or DTS Off. (See page 32)
If you use an HDMI cable to connect a Samsung
TV to the DVD recorder, you can operate the
recorder using the TV remote control. This is
only available with SAMSUNG TVs that support
Anynet+(HDMI-CEC). (See pages 30~31)
Please check for the logo. If your TV has
an logo, then it supports the Anynet+
function.
The DVD-R160 supports 1080P resolution. This is
only available when an HDMI cable is connected
to a TV that supports 1080P resolution.
This player upconverts regular DVDs for playback
on 1080P TVs. It does not play HD DVDs or Blu-
Ray discs.
To view all available resolutions when the
DVD-R160 is connected to your TV via HDMI,
press the P.Scan button repeatedly with the unit in
Stop mode.
01318A-R160-XAA-ENG.indb 1601318A-R160-XAA-ENG.indb 16 2007-05-02 오전 9:07:302007-05-02 오전 9:07:30