Recording
English - 40
Recording from External Equipment

Before you start

Check that the disc has enough available space for the recording.
Adjust the recording mode.
1. Press the OPEN/CLOSE button and place a recordable disc on the
disc tray.
2. Press the OPEN/CLOSE button to close disc tray.
Wait until "LOAD" disappears from the front panel display
3. Press the INPUT SEL. button to select the input source according to
the connection you made.
The front panel display changes in the following sequence:
AV1 AV2 DV
4. Press the REC MODE button repeatedly, to select the recording
speed(quality).
SP LP EP XP
5. Press the REC button.

To pause recording

Press the PLAY/PAUSE ( ) button to pause recording in progress.
Press the PLAY/PAUSE ( ) button again to resume recording.
To stop recording
Press the STOP ( ) button to stop or nish recording in progress.
When using DVD-RAM/DVD±RW/ DVD±R discs, the message ‘Updating
the information of disc. Please wait for a moment.’ is displayed.
You can not change the recording mode and input source during
recording.
Recording will stop automatically if there is no free space left for
recording.
Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc,
and up to 48 titles onto a DVD+RW/+R disc.
Recording will stop automatically if a copy protected image is
selected.
If you are using a Cable Box(no antenna), you cannot watch a
different cable TV program from the one you're recording.
DVD-RAM/DVD±RW/ DVD+R discs must be formatted before
starting to record. Most new discs are sold unformatted.
Do not use DVD-R authoring discs with this unit.
Recording : AV1
Record Mode XP (01:11)
01318A-R160-XAA-ENG.indb 4001318A-R160-XAA-ENG.indb 40 2007-05-02 오전 9:08:152007-05-02 오전 9:08:15