Samsung DVD-S124 manual Description-Rear Panel, DVD-S424

Description-Rear Panel

DVD-S424

SETUP

1 2 3 4 5 6 7

Rear Panel

1.DIGITAL AUDIO OUT JACKS

•Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.

2.ANALOG AUDIO OUT JACKS

•Connect to an amplifier with 5.1ch analog input jacks.

3.MIXED AUDIO OUT JACKS

•Connect to the Audio input jacks of your television, audio/video receiver, or VCR.

4.VIDEO OUT JACKS

•Use a video cable to connect to the Video input jack on your television.

5.S-VIDEO OUT JACK

•Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality picture. The S-Video must be selected in the VIDEO OUT SELECT.

6.COMPONENT VIDEO OUT JACKS

•Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video. Along with S-Video, Component Video provides the best picture quality. The Y, Pb, Pr must be selected in the VIDEO OUT SELECT.

7.VIDEO OUT SELECT SWITCH

•Use the switch to set video out. If Y, Pb, Pr is selected, S-Video may not work. If S-Video is selected, Y, Pb, Pr may not work.

NOTE

*Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.

11