English
- 17
Settings
Settings Tuning Your Television

for the DVD-VCR

You must tune your television for the DVD-VCR only
if you are using the RF cable.
To view pictures from your DVD-VCR when a
audio/video cable is used, the television must be set
to the audio/video mode (AV).
1Switch on the television.
2Switch on the DVD-VCR by pressing the
/I STANDBY/ON on the front of the DVD-VCR
or STANDBY/ON on the remote control.
3Select a programme position on the television
to be reserved for use with your DVD-VCR.
4Insert the video cassette in the DVD-VCR.
Check that the DVD-VCR starts reading the
cassette; if not, press the II button.
5Start a scan on your television or set the
television to UHF channel 36.
6Fine tune the television until the pictures and
sound are obtained clearly.
7When the picture and sound are perfectly clear,
store this channel at the desired programme
position on the television.
That programme is now reserved for use with
your DVD-VCR.
•Tuning Your Television for the DVD-VCR . . 17
•Setting the Date and Time . . . . . . . . . . . . . . 18
•Setting the Menu Language . . . . . . . . . . . . . 19
•Presetting the Stations Automatically . . . . . 19
•Presetting the Stations Manually . . . . . . . . . 21
•Clearing a Preset Station . . . . . . . . . . . . . . . 22
•Changing the Preset Station Table . . . . . . . . 23
•Selecting the RF OUT Sound Mode (B/G-D/K) . 24
•Setting the VCR Output Channel . . . . . . . . . 24