Samsung DVD-VR300E/EUR manual Presetting the Stations Automatically

System Setup

Presetting the Stations Automatically

You do not need to preset the stations if you have already set them automatically (see Plug & Auto Set Up on page 24).

Your DVD Recorder-VCR contains a built-in tuner used to receive television broadcasts.

You must preset the stations received through the tuner. This can be done:

•Plug & Auto Set up (see page 24)

•Automatically

•Manually (see page 27~28)

1	Open “MENU”
	With the DVD in Stop press the MENU button.
2	Select “Setup”
	Using the ❷buttons, move the selection bar to
	“Setup” then press ❿ or OK to select.
3	Select “Install”
	Using the ❷ buttons, move the selection bar

to “Install”, then press ❿ or OK to select.

Programme

5	Press OK button.
	A message appears, indicating that any channels
	already preset on the DVD Recorder-VCR will be
	deleted.

Programme

Press [OK] to continue, [Menu] to exit

6	Press OK to start the auto
	scaning.

• The first frequency band is scanned and the first station found is displayed and stored. And the DVD Recorder- VCR searches for the second station and so on.

• When the automatic scanning procedure has finished, the DVD Recorder-VCR switches automatically to programme 1.

• The number of stations automatically stored by the DVD Recorder-VCR depends on the number of stations that it has found.

Programme

						7	If you wish to cancel the auto scanning before the
							end, press the OK button.
							• Once the auto scanning procedure has finished,
							some stations may have been stored more than
4	Select “Auto Setup”						once; select the stations with the best reception
							and delete the ones no longer required.
	Move the selection			❷ buttons to “Auto Setup”
	then press ❿ or OK			button to select from the
	following options:
	P	rogramme
			TV System		: K
				36

26 - English