![](/images/new-backgrounds/1292560/29256031x1.webp)
Step 1: Unpacking
Plug the other end of the RF cable into the con-
4 nector previously used for the aerial on the televi- sion.
Accessories
| Check for the supplied accessories below. | |
| • Audio/Video Cable | |
onnectionsC | • RF Cable for TV | |
• Remote Control | ||
• Batteries for Remote Control (AAA Size) | ||
|
• User’s Manual
* Dispose of batteries according to local environmental regulations. Do not put them in the household trash.
Step 2: Connecting DVD Recorder-VCR to the TV using the RF Cable
To receive television programmes a signal must be received from one of the following sources:
•An outdoor aerial
•An indoor aerial
•A cable television network
•A satellite receiver
Note
To obtain better quality pictures and sound on your television, you can also connect your DVD
Aerial
AUDIO OUT |
TV
ANT
RF cable
Note
Make sure that both the television and the DVD
1 | Remove the aerial or network input cable from |
the television. |
Connect this cable to the 75Ω coaxial socket
2 marked on the rear of your DVD Recorder- VCR.
3 | Plug the RF cable supplied into the |
your DVD |
TV
socket on