Troubleshooting and information codes
CHECK THESE POINTS IF YOUR DISHWASHER...
PROBLEM | POSSIBLE CAUSE |
|
| SOLUTION | |||
|
|
|
|
|
|
| |
| The door is not closed completely. | Check that the door is latched and | |||||
| closed completely. Press the Start/ | ||||||
| The Start/Reset |
| button is not | ||||
|
| Reset |
| button before closing the | |||
|
|
| |||||
| selected. |
| |||||
|
| ||||||
| door. | ||||||
|
|
|
| ||||
|
|
|
|
|
|
| |
Will not start. | No programme is selected. | Select a programme. | |||||
|
|
|
|
|
| ||
The power cord is not connected. | Connect the power cord. | ||||||
| |||||||
|
|
|
|
|
|
| |
| There is no water supplied. | Check that the water supply valve | |||||
| is open. | ||||||
|
|
|
| ||||
|
|
|
|
|
|
| |
| The control panel is locked. | Deactivate the Child Lock function | |||||
| to unlock the control panel. | ||||||
|
|
|
| ||||
|
|
|
|
|
|
| |
|
|
|
| Add detergent without loading | |||
Has a bad odour. | There is water left over from the last | dishes and run the Daily Auto | |||||
cycle. | programme to clean the | ||||||
| |||||||
|
|
|
| dishwasher. | |||
Has water remaining after the | The drain hose is folded or clogged. | Straighten and unclog the hose. | |||||
programme has fi nished. |
|
|
|
|
|
| |
| An inappropriate programme was | Select a programme according | |||||
| to the soil level of the dishes as | ||||||
| been selected. | ||||||
| directed in this manual. | ||||||
|
|
|
| ||||
|
|
|
|
|
|
| |
| The fi lter is contaminated or not | Clean the fi lter and make sure the | |||||
| correctly fasten. | fi lters are fi tted properly. | |||||
|
|
|
|
|
|
| |
| No dishwasher detergent or not | Use an automatic dishwasher | |||||
Has food particles remaining | enough detergent is being used. | detergent or use more detergent. | |||||
|
|
|
|
|
| ||
on the dishes. | The pressure of the supplied water | The water supply pressure must be | |||||
| is low. | between 0.05 MPa and 0.8 MPa. | |||||
|
|
|
|
|
|
| |
| Spray arm jets are clogged. | Clean the spray arms. | |||||
|
|
|
|
|
|
| |
|
|
|
| Rearrange the dishes so they | |||
| The dishes are improperly loaded. | have good water access and do | |||||
| not interfere with spray arm and | ||||||
|
|
|
| ||||
|
|
|
| dispenser operation. | |||
|
|
|
|
|
|
| |
| There is no rinse aid in the | Check the dispenser and add rinse | |||||
| dispenser or not enough rinse aid | aid. | |||||
Does not dry dishes well. | was used. | Check rinse aid setting. | |||||
| Multi taps were used without | Select the Multi Tap function or use | |||||
| selecting the Multi Tap function. | rinse aid. | |||||
|
|
|
|
|
|
| |
28_ Troubleshooting and information codes
11/23/2011 10:54:51 PM
