Installing your dishwasher
STEP 9. COMPLETING THE INSTALLATION
1.Open the door and remove all foam, paper packaging, and unnecessary parts.
2.Turn on the circuit breaker you turned off before you began the installation.
3.Open the water supply valve to supply water to the dishwasher.
4.Turn on the dishwasher, and then select and run a cycle.
Check if the power turns on correctly and if there is any water leakage while the dishwasher is operating.
Make sure to check for water leakage on both ends of the water supply line and drain hose CAUTION connector.
22_ Installing your dishwasher
