Samsung EAD-T10EDEGSER, EAD-T10EDEGSTD manual Reset button method complete steps within 2 minutes

1 Connect the AllShare Cast Dongle to a power outlet using the travel adapter. The indicator turns red after 3 to 4 seconds.

2 Connect the AllShare Cast Dongle to a monitor using the HDMI A-to-A cable. The red indicator begins blinking after approximately 30 seconds.

• For information about connecting the HDMI cable, refer to the monitor’s user manual.

• The mobile device cannot connect to the AllShare Cast Dongle, unless the AllShare Cast Dongle is connected to a monitor.

3-1 To connect to a new mobile device, use one of the following methods. The PIN code method is not supported on some mobile devices.

•Reset button method (complete steps within 2 minutes)

Press the Reset button. The indicator turns blue. On the mobile device, launch AllShare Cast or Screen Mirroring. The monitor displays the AllShare Cast Dongle's name. Select the same name from the list that is displayed on your mobile device.

6