[ Selecting the 10SEC self-timer ]

Self-timer() / Right button

Selecting the self-timer1.Rotate the Mode Dial to select the desired recording mode.2.Press the SELF-TIMER button until the desired modeindicator displays on the LCD monitor.

A 10 second, 2 second or Double self-timer icon appears on the LCD monitor. In Movie Clip mode, only the 10-second self-timer will work.

10SEC self-timer( ) :

Pressing the shutter button will allow an interval of 10 seconds before the image is taken.

2SEC self-timer() :

Pressing the shutter button will allow an interval of 2 seconds before the image is taken.

Double self-timer (

) :

A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken. When using the flash, the 2-second self-timer may be delayed

for longer than 2 seconds depending on the flash charge time.

3.When you press the SHUTTER button, the picture will be taken after the specified time has elapsed.

INFORMATION

The default is OFF.When taking a picture using the self-timer, the self-timer lamp works as follows:

10 second self-timer setting : The self-timer lamp blinks at 1 second intervals for the first 7 seconds. It blinks at 0.5 second intervals for the remaining 3 seconds.

2 second self-timer setting : The self-timer lamp blinks at 0.5 second intervals for 2 seconds.

If you operate the Power button, Mode dial and Self-timer button during the self-timer operation, the self-timer function is cancelled.

Use a tripod to prevent the camera from shaking.

29