Getting to know your camera
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury.
Remove the battery when not planning to use the camera for a long period of time.
Otherwise the battery may leak corrosive electrolyte and permanently damage the camera’s components.
Leaking, overheating, or damaged battery could result in fire or injury.
-Use battery with the correct specification for the camera.
-Do not short circuit, heat or dispose of battery in fire.
-Do not insert the battery with the polarities reversed.
Be sure to format the memory card if you are using a newly purchased memory card for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera.
Do not fire the flash while it is in contact with hands or objects. Do not touch the flash after using it continuously. It may cause burns.
Take care not to touch the lens or lens cover to avoid taking an unclear image and possibly causing camera malfunction.
Do not move the camera while it is switched on when you are using the AC Charger. After use, always switch off the camera before unplugging the cable from the wall socket. Then make sure that any connector cords or cables to other devices are disconnected before moving the camera.
Failure to do so may damage the cords or cables and cause a fire or electric shock.
Credit cards may be demagnetized if left near a camera case. Avoid leaving magnetic strip cards near the case.
Do not insert the memory card the wrong way round.
Before inserting any cables or AC adapter, check the directions and do not insert by force. It may cause breakage of cable or camera.
Never the connect the 20 pin connector to a USB port of a PC. Doing so is highly likely to cause a computer malfunction.
Before an important event or going on a trip, you should check the camera condition. Samsung cannot be held responsible for camera malfunctions.
ENGLISH