Samsung i8 SAMSUNG I8 System requirements, About the software, XP/Vista, USB port, USB port, Processor, Mac OS 10.1, recommended, CD-ROMdrive, CD-ROMdrive, recommended), For Windows

System requirements

For Windows	For Macintosh
PC with processor better than
Pentium 450MHz
(Pentium 800MHz recommended)	Power Mac G3 or later, or Intel
* Samsung Converter
	Processor
PC with processor better than
Pentium 500MHz (Pentium IV
recommended)
Windows 98SE / 2000 / ME /
XP/Vista
* Samsung Converter	Mac OS 10.1 ~ 10.4
Windows 2000 or later
recommended
Minimum 128MB RAM	Minimum 256MB RAM
(Over 512MB recommended)	110MB of available hard-disk space
USB port	USB port
CD-ROM drive	CD-ROM drive
1024×768 pixels, 16-bit colour
display compatible monitor
(24-bit colour display	MPlayer (For movie clip)
recommended)
Microsoft DirectX 9.0 or later

About the software

After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically display.

Before connecting the camera to the PC, you should first install the camera driver.

Camera driver: This enables images to transfer between the camera and PC.

This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader. After installing the driver and connecting this camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My computer]. A USB Storage Driver is provided only for Windows. A USB Driver for MAC is not included with the Application CD. You can use the camera with Mac OS 10.1~10.4.

XviD codec: This makes movie clips (MPEG-4) recorded with this camera play back on a PC.

To play back a movie clip recorded with this camera, you must install the XviD codec. If a movie clip recorded with this camera does not play well, install this codec. This software is only compatible with Windows.

117