Starting the Recording mode

How to use the Program mode

Selecting the automatic mode will configure the camera with optimal settings and you can manually configure various functions.

Things to watch out for using the DIS mode

–

The digital zoom will not operate in the DIS mode.

–

If the lighting conditions are brighter than fluorescent lighting conditions,

 

the DIS will not activate.
1.Select the Program mode by pressingthe M (Mode) button (p.20).

2. Point the camera towards the subject and compose the image by using the LCD monitor.

3.Press the Shutter button to capture an image.Refer to page 37-42 for moreinformation about the Program mode menus.

00016

01:00 PM 2008/01/01

– If the lighting conditions are darker than in fluorescent lighting

conditions, camera shake warning indicator ( ) will be displayed. For

best results only take pictures in situations where the camera shake

warning indicator () is not displayed.
– If the subject is moving, the captured image may be blurred.

– Avoid moving the camera while the [Capturing!] message is displayed

to achieve a better result.

– As the DIS uses the camera’s digital signal processor, it may take a

little longer for the camera to process and save the images.

– If the image size is (

) or ( ) ,the DIS mode can’t be selected.

How to use the DIS(Digital Image Stabilization) mode

This mode will reduce the effect of camera shake and help you get a well exposed image in dim conditions.

How to use the FUN mode

In this mode, you can take pictures with various effects easily and simply.
1.Select the DIS mode by pressing the M (Mode) button. (p.20)

2.Point the camera towards the subject and compose the image by using the LCD monitor.

3.Press the Shutter button to capture an image.

00016

01:00 PM 2008/01/01

Select the FUN mode by pressing the

00016

M (Mode) button.

 

Refer to page 46-52 for more information.

01:00 PM 2008/01/01

021