Samsung EC-NV11ZBDF/AS, EC-NV11ZBBA/FR, EC-NV11ZBDA/DE, EC-NV11ZBDA/E3, STW-NV11B manual OSD set

~

File

OSD Set

OSD Set

Setup menu

[OSD set]

You can check shooting (Recording mode) and displayed image (Play back mode) information.

[ File name ]

This function allows the user to select the file naming format.

Full	OSD Set
Basic	OSD Set
Hide	File
LCD Save	Language
	Date&Time
	Exit:BACK

[Recording mode menu]

Full	OSD Set
Basic	OSD Set

HideFile

Language

Date&Time

Exit:BACK

[Play back mode menu]

[Series] : New files are named using numbers that	Series
follow the previous sequence, even when	Reset
a new memory card is used, or after
formatting, or after deleting all pictures.		Language
		Date&Time
[Reset] : After using the reset function, the next file
		Exit:BACK
name will be set from 0001 even after
formatting, deleting all or inserting a new
memory card.

-The first stored folder name is 100SSCAM, and the first file name is SNV10001.

[Full]	: When the smart button is touched, the icons will be enlarged and
	OSD will be displayed.
[Basic]	: When the smart button is touched, the icons will be enlarged and
	OSD will not be enlarged.
[Hide]	: If the camera doesn't operate for about 3 seconds, all OSD will
	disappear. When the shutter is pressed down or half way down, the
	shutter speed and auto focus frame will display. OSD may display by
	using the camera buttons except for the shutter button.

[LCD save] : If the camera is not used for about 30 seconds, the power and camera status lamps blink and the LCD monitor turns off. (LCD save is only applied to the Recording mode menu.)

- File names are assigned sequentially from SNV10001 SNV10002 SNV19999.

- The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM 101SSCAM ~ 999SSCAM.

-The files used with the memory card conform to the DCF (Design rule for Camera File systems) format.

-File names assigned in the Biz mode, will be set SB1ZXXXX

60