Samsung EC-NV30ZBBA/AR, EC-NV30ZSBA/GB, EC-NV30ZSBA/E2 System Requirements, About the software

System Requirements

For Windows	For Macintosh
PC with processor better than
Pentium II 450MHz (Pentium 800MHz	Power Mac G3 or later
recommended)
Windows 98SE/2000/ME/XP/Vista	Mac OS 10.1 ~ 10.4
Minimum 128MB RAM	Minimum 64MB RAM
(512MB recommended)
	(256MB recommended)
200MB of available hard disk space
	110MB of available hard-disk space
(1GB recommended)
USB port	USB port
CD-ROM drive	CD-ROM drive
1024x768 pixels, 16-bit color display
compatible monitor (24-bit color
display recommended),
Microsoft DirectX 9.0 or later

About the software

After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run.

Before connecting the camera to the PC, you should first install the camera driver.

■Camera driver : This enables images to transfer between the camera and PC.

This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader. After installing the driver and connecting this camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My Computer]. A USB Storage Driver is provided only for Windows.

A USB Driver for MAC is not included with the Application CD. You can use the camera with Mac OS 10.1 ~ 10.4.

■XviD codec : This allows movie clips (MPEG-4) recorded with this camera to be played back on a PC.

To play back a movie clip recorded with this camera, you must install the XviD codec. If a movie clip recorded with this camera does not play well, install this codec. This software is only compatible with Windows.

<<82 >>