Metering
If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures.
MULTI( |
| ) | : Exposure will be calculated based on |
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
| an average of the available light in the | 2272 | ISO | ||||
|
|
| image area. However, the calculation | AUTO | |||||
|
|
|
| METERING | |||||
|
|
| will be biased towards the centre of |
| |||||
|
|
|
|
|
|
|
|
| |
|
|
| the image area. This is suitable for |
| MULTI |
|
|
|
|
|
|
|
| SPOT |
|
|
|
| |
|
|
| general use. |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
SPOT ( | ) | : Only the rectangular area in the center |
|
|
|
|
|
| |
|
|
| of the LCD monitor will be metered for |
|
|
|
|
|
|
|
|
| light. This is suitable when the subject in the center is exposed correctly, | ||||||
|
|
| regardless of the back lighting. |
|
|
|
|
|
|
Fixed as [MULTI] in the TEXT mode.
INFORMATION
The default metering mode is Multi pattern metering.
If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, rather use exposure compensation.
ISO
You can select the ISO sensitivity when taking pictures.
The speed or specific
The higher the ISO value, the higher the camera’s sensitivity to light is and therefore the greater its capacity to take pictures in dark conditions. However, the noise level in the image will increase as the ISO value increases, making the image appear coarse.
ISO
-AUTO :
The camera's sensitivity is automatically changed by variables such as lighting value or subject brightness.
-100, 200, 400 :
You can increase the shutter speed while the same amount of light is present, by increasing the ISO sensitivity. However, the image may be saturated in high luminance.
Fixed as [100] in the TEXT mode.
NOR
ISO
ISO
AUTOAUTO
100
200
400
[ STILL IMAGE mode ]
36