Using the camera buttons to adjust the camera

The RECORDING(STILL IMAGE, VOICE RECORDING, MOVIE CLIP) mode function can be set up by using the camera buttons.

POWER button

Used for turning the camera’s power on / off.If this camera isn’t operated during the specified time(about60 SEC.), the camera power will be idle(LCD monitor :

OFF, Camera status lamp : ON ) automatically. To use the camera again, press any of the camera buttons except the power button. If there is no operation during the specified time after the idle mode, the camera power will be

turned off automatically to save battery life.Refer to page 70 for more information about the auto power off function.

SHUTTER button

Used for taking an image or recording voice in theRECORDING (STILL IMAGE, VOICE RECORDING,MOVIE CLIP) mode.In MOVIE CLIP modePressing the shutter button down fully starts the process

for recording a movie clip. Press the shutter button once and the movie clip is recorded for as long as the available recording time in the memory allows. If you wish to stop recording, press the shutter button again.

In STILL IMAGE mode

Pressing the shutter button down halfway activates the autofocus and checks the condition of the flash. Pressing the shutter down fully takes the image and stores the relevant data regarding the shot. If you select voice memo recording, the recording will start after the camera has finished storing the image data.

ZOOM W/T button

Used for digital zooming in / out.

When you press the zoom (W/T) button, the zoom bar will display in the upper centre of the LCD monitor.

22