Samsung DIGIMAX UCA501 +/- button, INFORMATION, - AUTO, - CLOUDY, - SUNSET, - CUSTOM, condition, - DAYLIGHT, - TUNGSTEN, - Fluorescent H, - Fluorescent L, fluorescent lighting

+/- button

2. Use the LEFT and RIGHT buttons to set the desired exposure compensation factor ( Ev).

3. Press the +/- button again. The value you set will be saved and the Exposure Compensation setup mode will close. If you change the exposure value, the exposure

indicator ( ) will be displayed on the bottom of the LCD monitor.

INFORMATION

A negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.

White balance : The white balance control allows you to adjust the colours to appear more natural looking.

Selecting a White Balance

1. Press the +/- button, and then use the UP and DOWN

buttons to select the white balance icon ( ). The white balance menu bar will appear as shown.

2.Use the LEFT and RIGHT buttons to set the white balance to the desired value. The value you set will be displayed on the LCD monitor.

- AUTO	: The camera automatically selects the appropriate white balance
	settings, depending on the prevailing lighting conditions.
- DAYLIGHT	: For taking images outside.
- CLOUDY	: For taking images under a cloudy and overcast sky.
- SUNSET	: For taking images at sunset.
- Fluorescent H	: For shooting under daylight fluorescent types of three-way
	fluorescent lighting.
- Fluorescent L	: Shooting under white fluorescent lighting.
- TUNGSTEN	: For shooting under tungsten (standard light bulb) lighting.
- CUSTOM	: Allows the user to set the white balance according to the shooting
	condition.

Different lighting conditions may cause a colour cast on your images.

3. Press the +/- button again. The value you set will be saved and White Balance setup mode will end.

30