Shooting

INFORMATION

Continuous and AEB shots cannot be selected in the TIFF image quality format.

To take the continuous shot, the number of available shots must be more than 2 because the minimum number of the continuous shots are 2. To take the AEB shots, the number of available shots must be more than 3 because of the same reason.

Camera shake can be a problem when using the AEB shooting mode and it takes time to store the AEB image to the memory. We recommend using a tripod.

ISO

You can select the camera’s sensitivity to light by selecting the ISO sub menu. The speed or specific light-sensitivity of a camera is rated by ISO numbers.

1.Rotate the mode dial to the RECORDING mode and press the MENU button.

2.Press the DOWN button and the cursor will be shifted to the main menu.

3.Select the [SHOOTING] menu by pressing the UP/DOWN button.

4.Press the DOWN button on the [SHOOTING] menu and the next menu page will be displayed.

5.Select the [ISO] menu by pressing the UP/DOWN button.

6. Press the RIGHT button and the cursor will shift to the [ISO] sub menu.

PROG

SETUP

MyCAM

7. Select the desired sub menu by pressing the UP/DOWN button.

 

 

 

 

 

ISO

 

 

 

AUTO

- AUTO

: The camera's sensitivity is automatically

 

 

 

W.B

 

 

 

100

 

changed by variables such as lighting value or

 

 

 

 

EFFECT

 

 

 

200

 

subject brightness.

SHARP

 

 

 

400

- 100/ 200/ 400 : In the same lighting conditions, the higher the

 

 

 

 

 

BACK:

 

 

 

SET:OK

 

ISO value is, the faster the shutter speed will

 

 

 

 

 

 

 

 

 

 

 

 

be. However, the images can be saturated in very bright conditions.

8.Press the OK button to confirm the setting.

Press the menu button twice and the menu display will disappear. Take a picture.

INFORMATION

The higher the number, the more sensitive it is to light. As with film, the higher speeds usually induce more electronic noise so the image gets grainier.

When the power is turned off, the changed setting value returns to the initial value. [AUTO] is not applied to A/S/M mode.

RECORDING

55