Connecting to a WLAN and configuring network settings

Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.

Connecting to a WLAN

1Rotate the mode dial to .

2Select , , or .

3Follow the on-screen instructions until the Wi-Fi Setting screen appears.

•The camera automatically searches for available AP devices.

•In some modes, press [m], and then select Wi-Fi Setting.

4Select an AP.

Wi-Fi Setting

Refresh

Samsung 1

Samsung 2

Samsung 3

Samsung 4

Back Manual

•Select Refresh to refresh the list of connectable APs.

•Select Add wireless network to add an AP manually. The AP name must be in English to add the AP manually.

Icon Description

Ad hoc AP

Secured AP

WPS AP

Signal strength

Press [t] to open network setting options.

•When you select a secured AP, a pop-up window appears. Enter the required passwords to connect to the WLAN. For information about entering text, refer to "Entering text". (p. 96)

•When a login page appears, refer to "Using the login browser". (p. 94)

•When you select an unsecured AP, the camera will connect to the WLAN.

•If you select a WPS profile supported AP, select →WPS PIN connection, and then enter a PIN on the AP device. You can also connect to a WPS profile

supported AP by selecting →WPS button connection on the camera, and then pushing the WPS button on the AP device.

•If a pop-up message about data collection regulations appears, read and agree to it.

Wireless network 93