Samsung ECST200FBPLUS Connecting to a Wlan and configuring network settings, Select an AP

Connecting to a WLAN and configuring network settings

Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.

Connecting to a WLAN

1 On the Home screen, scroll to <Wi-Fi>.

2 Select , , , , or .

3 Press [], and then select Wi-Fi Setting.

•In some modes, press [ ] or follow the on-screen instructions until the Wi-Fi Setting screen appears.

•The camera automatically searches for available AP devices.

4 Select an AP.

Wi-Fi Setting

Samsung 1

Samsung 2

Samsung 3

Samsung 4

Samsung 5

Back Select

Icon	Description
	Ad hoc AP
	Secured AP
	WPS AP
	Signal strength
	Press [ ] to open AP setting options

•When you select a secured AP, a pop-up window appears. Enter the required passwords to connect to the WLAN. For information about entering text, refer to "Entering text". (p. 106)

•When a login page appears, refer to "Using the login browser". (p. 104)

•When you select an unsecured AP, the camera will connect to the WLAN.

•If you select a WPS profile supported AP, select WPS PIN, and then enter a PIN on the AP device. You can also connect to a WPS profile supported AP by selecting WPS PBC on the camera, and then selecting WPS button on the AP device.

•Select WPS PBC to connect WPS AP.

•Select Refresh to refresh connectable APs.

•Select Add wireless network to add an AP manually.

Wireless network (ST200F/ST201F/ST205F only) 103