Using AllShare Play to send les

Wireless network (ST150F/ST151F/ST152F only)
119
•
You can share up to 1,000 recent les.
•
On an AllShare Play device, you can view only photos or videos captured with your camera.
•
The range of the wireless connection between your camera and an AllShare Play device may vary depending on the specications of the AP.
•
If the camera is connected to 2 AllShare Play devices, playback may be slower.
•
Photos or videos will be shared in their original sizes.
•
You can use this feature only with devices that support AllShare Play.
•
Shared photos or videos will not be stored on the AllShare Play device, but they can be stored in the camera to meet the device's specications.
•
Transferring photos or videos to the AllShare Play device may take some time depending on the network connection, the number of les to be shared, or the sizes of the les.
•
If you power o the camera abnormally while viewing photos or videos on an AllShare Play device (for example, by removing the battery), the device considers the camera to still be
connected.
•
The order of photos or videos on the camera may be dierent than on the AllShare Play device.
•
Depending on the number of photos or videos you want to share, it may take some time to load your photos or videos and complete the initial set-up process.
•
While viewing photos or videos on the AllShare Play device, continuously using the device's remote or performing additional operations on the device may prevent this feature from
working properly.
•
If you reorder or sort les on the camera while viewing them on an AllShare Play device, you must repeat the initial set-up process to update the list of les on the device.
•
When there are no les in the camera memory, you cannot use this feature.
•
We recommend you use a network cable to connect your AllShare Play device to your AP. This will minimize any video ‘Stuttering’ you may experience when streaming content.
•
To view les on an AllShare Play device using the Nearby devices feature, enable multicast mode on your AP.