Caution

Leaking, overheating, or burst batteries could result in fire or injury. Use batteries with the correct specification for the camera.

Do not short circuit, heat or dispose of battery in fire. Do not insert the batteries with polarities reversed.

Remove the batteries when not planning to use the camera for a long period of time. Batteries may leak corrosive electrolyte and permanently damage the camera's components. Do not fire the flash while it is in contact with hands or objects. Do not touch the flash after using it continuously. It may cause burns.

If you are using the AC power adaptor be careful when moving the camera.

After use, always switch off the camera before unplugging the adapter from the wall socket. Then make sure that any connector cords or cables to other devices are disconnected before moving the camera. Failure to do so may damage the cords or cables and cause a fire or electric shock.

The Lens is attached to the camera body. Do not drop or press the lens by force. It may cause a camera malfunction.

Do not pull the lens by hand or do not rotate the zoom ring quickly. It may cause a camera malfunction. Please be careful when using the lens.

Do not extract the external flash from the camera by force. It may cause damage to the top of the camera.

PRECAUTIONS FOR BATTERY USAGE

Only use specified batteries with this camera. Use of other batteries can cause overheating or explosion.

Replace the batteries at the same time. Do not mix battery brands, type or an old battery with a new one. It may cause explosion or overheating.

The battery should be inserted correctly with regard to polarity (+ and -) marked on the battery and the camera.

AAlithium batteries, AA alkaline batteries and CR-V3 are not rechargeable. Do not disassemble the battery. Recharging and disassembling can cause explosion or overheating.

3