Troubleshooting
Problem |
| Cause | Remedy |
|
| AE lock is not |
|
| |
| AE lock function | available when set | Use AE lock with any setting other than | (Manual) | |
does not operate | to | (Manual) mode | mode or (Bulb) mode. |
|
| or | (Bulb) mode |
|
|
|
|
|
| |
| When flash mode is |
|
| |
| set to [Auto |
|
| |
| discharge] or [Auto | Set flash mode to [Manual discharge] or [Manl | ||
| flash+Redeye | |||
| flash+Redeye reduct]. (p.47) |
| |||
reduct], the flash will |
| |||
|
| |||
| does not |
|
| ||
| not discharge if the |
|
| ||
| discharge |
|
| ||
| subject is bright |
|
| ||
|
|
| ||
|
|
|
| |
| Mode dial is set to | Set mode dial to any setting other than | (Flash OFF). | |
| a | (Flash OFF) | (p.45) |
|
|
|
|
| |
The power zoom | The camera does |
|
| |
| system does not | not have the power | Use manual zoom. (p.46) |
| |
| function | zoom function |
|
| |
|
|
|
| |
| USB connection | The transfer mode is | Set transfer mode to [PC]. |
| |
| set to [PictBridge] |
|
| ||
| with computer |
|
| ||
|
|
|
| |
| does not work | An error occurred |
|
| |
| properly* |
|
| ||
| while sending USB | Change the transfer mode to |
| ||
|
| |||
| data |
|
| |
|
|
|
|
|
USB connection | The transfer mode is |
|
| |
with printer does | Set transfer mode to [PictBridge]. (p.82) |
| ||
not work properly | set to [PC] or |
|
| |
|
|
|
| |
|
|
|
|
|
*In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by taking the batteries out and putting them back in again. When the mirror remains in the up position, take the batteries out and put them back in again. Then, turn the power on. The mirror will retract. After the procedure is done, if the camera operates correctly, it does not require any repairs.
*Refer to the software instructions for details on connecting the camera to a PC. (p.169)
197